loading page

Biobased Lamb Tail Fat Phase Change Material with Enhanced Thermal Properties by Incorporation of Cyclophosphazene Additives
  • +3
  • Nuray KUP AYLIKCI,
  • Halil DUYAR,
  • Ergin YALCIN,
  • Elif Büşra CELEBİ,
  • Volkan AYLIKCI,
  • Ferda HACIVELİOĞLU
Nuray KUP AYLIKCI
Iskenderun Technical University

Corresponding Author:[email protected]

Author Profile
Halil DUYAR
Gebze Technical University
Author Profile
Ergin YALCIN
Iskenderun Technical University
Author Profile
Elif Büşra CELEBİ
Gebze Technical University
Author Profile
Volkan AYLIKCI
Iskenderun Technical University
Author Profile
Ferda HACIVELİOĞLU
Gebze Technical University
Author Profile

Abstract

Among organic phase change materials, paraffin is most commonly used, but it is not environmentally friendly due to its petrochemical content. For efficient utilization of solar or thermal energy, new phase change materials are urgently needed, or it is necessary to improve the thermal properties of existing materials. Therefore, the utilization of lamb’s tail fat as a latent heat storage material is of particular importance for the evaluation of bio based waste oils. T-history is one of the simplest and most reliable and the simple equipment setup and reliable results make the T-History method attractive. In this study, new phase change materials were improved by using different concentrations of cyclophosphazene derivatives as an additive to the starting lamb tail fat material. According to the results, 1% HEHCP-doped lamb tail fat can be proposed for application in thermal energy storage systems when used for insulation. In addition, it is found that if the phase change materials developed by inclusion of HBACP can be operated as cooling liquid for photovoltaic panels or as working fluid in concentrated solar power systems, owing to higher fusion of heat value of 1% HBACP and higher specific heat capacity of 2% HBACP consisting lamb tail fat.
11 Jul 2023Review(s) Completed, Editorial Evaluation Pending
11 Jul 2023Submitted to Energy Storage
17 Jul 2023Submission Checks Completed
17 Jul 2023Assigned to Editor
20 Jul 2023Reviewer(s) Assigned
20 Jul 2023Reviewer(s) Assigned
02 Oct 2023Editorial Decision: Revise Major
13 Nov 2023Review(s) Completed, Editorial Evaluation Pending
13 Nov 20231st Revision Received
13 Nov 2023Submission Checks Completed
13 Nov 2023Assigned to Editor
18 Nov 2023Reviewer(s) Assigned
18 Nov 2023Reviewer(s) Assigned